× Welcome to our forum - Willkommen in unserem Forum

Tell us a little about yourself, what your hobbies are, and what else might be important about you.
-
Stellt euch kurz vor, erzählt uns was eure Hobbys sind und was euch sonst noch wichtig ist.

Neues Mitglied und eine neue Technik

More
01 Oct 2013 17:41 #9307 by OneCut
Replied by OneCut on topic Neues Mitglied und eine neue Technik
Hallo Angelika

Die Excalibur gehört meinem Vater, er verkauft diese Maschinen. Da habe ich schon Glück :)

Gruss Lukas

Please Log in or Create an account to join the conversation.

More
01 Oct 2013 17:46 #9308 by Angelika
Replied by Angelika on topic Neues Mitglied und eine neue Technik
AAAAH-HA!!Da gehen bei mir natürlich alle Lampen an :woohoo:

Wie wäre es mit einem neuen Thread unter "Werkzeuge und Maschinen", in dem Du Deine Säge vorstellst? Hier hat niemand so eine (glaube ich auf jeden Fall) und mich würde der Unterschied zur Hegner sehr interessieren. Hast Du dazu Lust?

You should see what I saw!

Please Log in or Create an account to join the conversation.

More
01 Oct 2013 19:20 #9316 by robbi
Replied by robbi on topic Neues Mitglied und eine neue Technik
Hallo Lukas,

herzlich Willkommen!

Deine Werke gefallen mir sehr gut, gerade der Baum hat es mir sehr angetan.

Please Log in or Create an account to join the conversation.

More
01 Oct 2013 20:32 #9330 by OneCut
Replied by OneCut on topic Neues Mitglied und eine neue Technik
Ja das kann ich machen. Werde morgen abend mal dabei schauen.

Please Log in or Create an account to join the conversation.

More
01 Oct 2013 21:09 #9332 by Entry
Replied by Entry on topic Neues Mitglied und eine neue Technik
Hey Lukas, du hast es drauf. Deine Technik sieht richtig gut aus und hat mich gleich inspiriert.
Ich bin auch etwas an eine Doku erinnert die ich letztens gesehen habe.
Darin ging es um Fraktale und deren Wirkung auf den Betrachter.

Ich bin sowohl an deinen Arbeiten als auch der Excalibur interessiert.

LG

LG Tom

Please Log in or Create an account to join the conversation.

More
06 Oct 2013 20:57 #9452 by Holzwurm
Replied by Holzwurm on topic Neues Mitglied und eine neue Technik
Hallo Lukas,
ein herzliches Willkommen auch von mir
Sehr schöne und sehr saubere Arbeiten hast du da abgeliefert!! Super!!

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

More
06 Oct 2013 21:33 #9456 by merlini60
Replied by merlini60 on topic Neues Mitglied und eine neue Technik
Hallo Lukas,einen herzliches Willkommen auch von mir, mein Gott sind diese Teile schön!!!Ich bin begeistert, das wäre auch etwas was mich begeistern könnte. Wüsste aber nicht wie .
lg Christine

Please Log in or Create an account to join the conversation.

More
07 Oct 2013 22:01 #9501 by Bastelwastel
Replied by Bastelwastel on topic Neues Mitglied und eine neue Technik
Hi Lukas, auch von mir ein herzliches Willkommen! Coole Technik, am besten gefällt mir die Tatsache, das man ohne Sägeblatt ein- und ausfädeln Objekte mit solch toller Wirkung erzielen kann!
Hut ab!

Liebe Grüße Sabine

Please Log in or Create an account to join the conversation.

More
08 Oct 2013 23:48 #9555 by merlini60
Replied by merlini60 on topic Neues Mitglied und eine neue Technik
Hallo Lukas, also ich hätte da mal eine Frage an Dich, verkaufst du auch Deine Vorlagen? Oder ist das nicht möglich hier? Hätte gerne eine Antwort von Dir.Wenn ja kannst Du mir ja mal Antwort geben.
Lg
Christine

Please Log in or Create an account to join the conversation.

More
09 Oct 2013 06:27 #9556 by Wolfgang
Replied by Wolfgang on topic Neues Mitglied und eine neue Technik

verkaufst du auch Deine Vorlagen? Oder ist das nicht möglich hier?


Hallo Christine,

das Forum ist keine Verkaufsplattform. Wenn Du an ein bestimmtes Mitglied ein Anliegen hast kannst Du dieses über "Private Nachrichten" kontaktieren. Wenn Du ganz allgemein etwas suchst kannst Du das im Marktplatz unter "Gesuche" einstellen.

Gruß
Wolfgang

Unmögliches wird sofort erledigt. Wunder dauern etwas länger.

Please Log in or Create an account to join the conversation.