× Fretwork Projects - Silhouetten-Arbeiten

Making fretwork needs patience and accuracy
-
Silhouetten-Arbeiten erfordern Geduld und Präzision

Mr. und Mrs. Santa

More
27 Nov 2019 15:33 #71357 by Wolfram
Mr. und Mrs. Santa was created by Wolfram
Kleines Geschenk zu Weihnachten aus Feinschnitt kreativ. Mr. und Mrs. Santa.

This message has an attachment image.
Please log in or register to see it.

The following user(s) said Thank You: Leshko

Please Log in or Create an account to join the conversation.

More
27 Nov 2019 16:05 #71360 by Buffy
Replied by Buffy on topic Mr. und Mrs. Santa
Das wirkt sehr filigran. Wie groß ist das Bild denn?

Eine saubere Arbeit!

Grüße aus der Eifel

Volker

Please Log in or Create an account to join the conversation.

More
27 Nov 2019 16:12 #71363 by Wolfram
Replied by Wolfram on topic Mr. und Mrs. Santa
Hallo Volker, der Rahmen ist 21 x 21 cm. Die Figuren sind 5x16 cm.

Gruß

Wolfram
The following user(s) said Thank You: Buffy

Please Log in or Create an account to join the conversation.

More
27 Nov 2019 16:18 #71365 by Angelika
Replied by Angelika on topic Mr. und Mrs. Santa
Da war ja Fingerfertigkeit gefordert - vor Allem die Schleife bei Mrs. Santa beeindruckt mich!

You should see what I saw!

Please Log in or Create an account to join the conversation.

More
27 Nov 2019 18:55 #71372 by yolli
Replied by yolli on topic Mr. und Mrs. Santa
Putzig sind die Beiden :)

Please Log in or Create an account to join the conversation.

More
28 Nov 2019 11:55 #71390 by cat
Replied by cat on topic Mr. und Mrs. Santa
Mag ich gut leiden :-).

Liebe Grüße - Inge

Please Log in or Create an account to join the conversation.

More
28 Nov 2019 18:34 #71404 by Helga
Replied by Helga on topic Mr. und Mrs. Santa
Sehr filigran, Toll

Bei mir würde das, das Schleifen nicht überleben,

LG
Helga

Please Log in or Create an account to join the conversation.

More
28 Nov 2019 18:48 #71406 by Wolfram
Replied by Wolfram on topic Mr. und Mrs. Santa
Helga,

gaaanz vorsichtig auf den großen Bandschleifer legen und mit Körnung 300 schleifen, dann geht das.

Gruß
Wolfram

Please Log in or Create an account to join the conversation.